Warnings
Failure to follow these instructions could result in damage to the product and void
the factory warranty.
The accuracy of the door preparation is critical for the proper functioning and
security of this product. Misalignment can cause performance
degradation and
lessening of security.
Finish Care: This lockset is designed to provide the highest standard of product quality and performance. Care should be taken to ensure a long-
lasting finish. When cleaning is required use a soft, damp cloth. Using lacquer thinner, caustic soaps, abrasive cleaners or polishes could damage the
coating and result in tarnishing.
IMPORTANT: Do not install batteries until the lock is completely installed on door.
1. Master PIN Code(4~10 digit): Default master PIN code is “12345678”,please modify it after installation.
2. User PIN Code Number: User PIN codes can be set up with PIN code numbers (00~19).
3. User PIN Code(4~10 digit): User PIN codes can be set up through Master PIN code or Alfred APP. Each User PIN code has only one PIN Code Number.
Introduction
The Alfred DB1 combines a robust lockset with a contemporary electronic aesthetic.
Users benefit from an interactive touch screen that makes day-to-day access effortless, as well as offering voice-guided programming for simple
updates to user information in the event of staffing changes or security breaches. Alfred DB2 is engineered for quick and easy installation and fits in
place of a standard deadbolt lock door prep.
If this is an Wireless-enabled lock,it needs to located within 50-100 feet of another network controller(Gateway).That distance is influenced by
objects between the lock and the controller and may be expended depending on proximity to other network devices. Also, if the lock is connected to a
network controller, it is recommended that it is programmed through the centralized user interface(PC or hand-held device) to ensure communication
between the lock and the controller unit.
Parts Illustrations
150mm(L) x 65mm(W) x 14mm(H)
200mm(L) x 77mm(W) x 46mm(H)
Operation temperature: -30~60C
Outside
escutcheon
Inside
escutcheon
Battery
AA alkaline battery x4
(Operating voltage: 3.8~6.0V)
Last up to one year
(10 times open/close per day)
Touch screen
keypad
Cylinder
(optional)
Battery
cover
Thumb turn
Latch bolt
DB1 Series
Programming Instructions
Alfred INC. reserves all rights for the final interpretation to this instruction.
All design and specifications are subject to change without notice
Item
Specifications
Remarks
1/9
