Manual
Mobile Timing MT1
- 11 -
Search operator:
You can execute a manual search for an operator. After the search is finished, you have to
choose the one of the listed operators by pressing the number which is shown on the left. Con-
firm with the ENTER button.
If no operator listed, there is no mobile network available.
Server:
Here we can change to our developer server for testing. Please use the main results server
which is
Reconnect mobile network:
When there is a mail function on the mobile network it can be necessary to execute a manual
reconnect to re-establish mobile connection.
3.1.4.5 GPS
If there is no GPS available:
At the next picture you can see a normal operation with more than 3 satellites in view.
In this example there are 7 satellites in use and 26 satellites in view. You also can see the
altitude and GPS signal strength of the 7 best satellites which are used.
The GPS receiver uses GPS, GLONASS and GALILEO Satellites.
3.1.4.6 Test
This menu is for internal tests only.
4
GPS
The internal GPS receiver is always on. You can see the status of the GPS receiver in the
upper left corner of the status bar.
No GPS reception:
