Aliaro reserve the right to vary from the description given in this data sheet and shall not be liable for any errors.
www.aliaro.com
Chassis installation
Electromagnetic Compatibility
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with radio
and television reception and prevent unacceptable performance degradation, install and use this
product in strict accordance with the instructions in the product documentation.
Furthermore, any modifications to the product not expressly approved by Aliaro
could void your authority to operate it under your local regulatory rules.
Unpacking the module
•
Carefully inspect the shipping container and the module for damage. Check for visible
damage to the exterior and interior of the chassis. If damage appears to have been
caused during shipment file a claim with the carrier. Retain the packing material for
possible inspection and/or reshipment. If the chassis is damaged, promptly contact
Aliaro and do not install it.
What You Need to Get Started
To set up and use the module you need the following items:
Hardware
•
SLSC-12001 chassis
•
SLSC module(s)
•
Power cable
•
Power input connector
•
External 24V power source
Documentation
•
Power Switch Unit Specification
Caution: Do not touch the contacts or remove the I/O boards or cables while
the system is energized.
The SLSC chassis and the SLSC module do not support hot plug-in. The entire
chassis must be powered off when a module is inserted or removed.
