24
www.Observint.com
The number of cameras connected to the ports on the back of the NVR plus the number of cameras on the LAN added to the NVR
cannot exceed the camera limit of the NVR.
NOTE
For a lists IP cameras compatible w
ith your NVR, see your product vendor.
Use the following guidelines to add a camera that was discovered on the LAN to the NVR. In the example below, an Alibi camera
discovered on the LAN at IP address 192.168.4.3 will be added to NVR channel D2.
1. Open the Camera Management menu. Go to
Main menu | Camera
.
2. Click on a camera channel where no camera is assigned. To determine if any camera is assigned to a channel, click on the icon
in the
Status
column to check the channel status. In the example above, cameras in the list shown above with the yellow
alert triangle in the
Status
column are not to any channel.
3. For the example shown above, click on the icon in the
Edit
column for channel D2. The
Edit IP Camera
menu will open.
SECTION 2: INITIAL NVR SETUP
Summary of Contents for ALI-NVR71128R
Page 8: ...viii www Observint com NOTES ...
Page 232: ...224 www Observint com ...
