25
Alibi™ NVR Firmware V3.6.22 User Manual
Configure the Edit menu as follows to add the camera at IP addresses 192.168.4.3:
a. In the
Adding Method
line, open the drop down list, and then select
Manual
.
b. Click in the Camera IP Address field, and then enter the IP address of the camera to change: 192.168.4.33.
c. On the Protocol line, open the drop down list and then select the protocol of the camera shown in the channel table for
this camera:
Alibi
. In the window, the User Name for the camera will change to
admin
.
d. Click the entry field on the
Admin Password
line, and then enter the camera password for user
admin
.
e. Click
OK
to save your settings. The camera list will be updated to show the camera you added.
SECTION 2: INITIAL NVR SETUP
Summary of Contents for ALI-NVR71128R
Page 8: ...viii www Observint com NOTES ...
Page 232: ...224 www Observint com ...
