14
20/11/2019
EN
CHARGING THE PRODUCT FOR THE FIRST TIME
• Press
« ON/OFF »
button on the base of the lamp to switch off
the LED before charging.
• Connect the adapter to the charging socket in the base
of the lamp. Then plug the charger in. The charging light
will be red.
• For the first recharge, the lamp must remain on charge for
8 hours. Subsequently the battery will take approximately 6
hours to recharge.
LED BEHAVIOR
•
RED :
charging.
•
LED off :
battery charged
OR
adapter not plugged.
USING THE LAMP
Simply press the
« ON/OFF »
switch to light up, switch off and change the colour mode of the lamp.
• To light up : press the switch button once.
• To change colour press again.
• To switch off : press button for three seconds.
It is also possible to use the remote control :
R
G B
R
G B
. . . . . . . . . . . . . . . . . . . .
Adjust the level of light
ON
. . . . . . . . . . . . . . . . . . . . . . . . .
Switch on the LED
OFF
. . . . . . . . . . . . . . . . . . . . . . .
Switch off the LED
COLOR SELECTION
. . . .
Choose a colour from the 16 available
FLASH MODE
. . . . . . . . . . . .
Continuous automatic colour change
STROBE MODE
. . . . . . . . . .
Very fast automatic colour change
FADE MODE
. . . . . . . . . . . . .
Automatic colour change with the colours fading into one another
SMOOTH MODE
. . . . . . . . .
Automatic colour change with the colours fading into one another slowly
CLEANING
• Clean the lamp with a damp cloth. Do not use detergents or any other chemical products as they could
damage the lamp’s cover.
• Do not expose the charger to water.
This lamp is fully protected against dust and splashing water. It is intended for indoor and out-
door use. The charger is designed for indoor use ONLY away from moisture. Not to be charged
outdoors.
ON/OFF
ON/OFF
HOW TO USE
Summary of Contents for CUBO 40
Page 30: ......