15
20/11/2019
EN
ELECTRICAL DATA
CHARGER :
100~240V AC, 50–60 Hz — 7,5V DC, 600mA
BATTERY :
Li-Po, 3,7V, 2400mAh
INFRARED REMOTE CONTROL
R
G
B
W
OFF
ON
FLASH
STROBE
FADE
SMOOTH
USE
Ensure there are no obstacles between the infrared signal of the re-
mote control and the lamp. It can be used at a distance of between
1 and 5 metres from the LED lamp, according to surroundings.
NOTE
• Before using the remote, remove the plastic tab from the bat-
tery compartment.
• If the remote doesn’t appear to be working after you have pu-
shed the buttons several times, put it down for 1 minute, then
move nearer to the lamp and begin again.
• The remote can be used on more than one lamp but you will
need to be closer to the lamp than normal in order to ensure
you are changing the correct lamp.
• Indoors, due to interference from other domestic appliances, it
may be difficult to use the remote from a distance of 5m. If so,
get nearer to the lamp.
Remote control reference
REMOTEAG01 (SW-RM001)
Remote control frequency
38MHz
Summary of Contents for CUBO 40
Page 30: ......