27
19/10/2022
EN
Only use the griddle outdoors. Make sure that there are no gas leaks before use.
Never check this with a flame. To check, use a soapy solution.
CONNECTING TO GAS
• Firstly, make sure that there are residues on the opening key of the gas canister, nor the decom-
pressor, nor the burners nor their components. Check there are no insects or insect nests in any of
the apparatus’ openings. An obstructed burner may cause a fire.
• Clean the burner holes with a special cleaning product for gas burners.
• Connect the end of the gas hose to the screw thread or the gas hose connector nozzle (optional) by
using a key or a tightening bolt. (not provided). If you replace the hose, repeat the safety instructions
before use.
• Disconnect the compression valve of the gas canister when the griddle isn’t in use.
• This apparatus must always be used in a well-ventilated area. It should not be used indoors or in
a garage.
CHECKING FOR LEAKS
• Prepare a soapy solution with ¼ washing up liquid and ¾ water.
• Make sure that all control switches are in the «
OFF
» position.
• Connect the compression valve to the gas cylinder, checking all of the connections.
• Put the soap solution through the hose and the connection points. If bubbles appear, there’s a
leak and this must be repaired before use.
• Check again after fixing the problem.
• Close the gas valve on the canister once the test is finished.
• If a leak is detected and it’s not repairable, do not try to tap the leak yourself, get in touch with
the aftersales department directly.
BEFORE USE
+
+
+
SAOP
1
3
4
2
5
Summary of Contents for PH1002SB
Page 63: ......
