28
19/10/2022
EN
INSTRUCTIONS OF IGNITION
1. Build the product following the assembly instructions carefully.
2. Connect the gas hose to the appliance, and connect the pressure regulator to the hose.
3. Connect the pressure regulator to the valve of the gas cylinder following the instuctions provided
with the regulator.
4. Make sure all the buttons are in the «
OFF
» position (switched off) before opening the gas valve.
5. Open (turning the button to «
ON
») the gas flow ..or switch on the pressure regulator (following
the instructions given with this part). Check that there are no gas leaks between the cylinder, the
pressure regulator, and the valve by using a soapy water solution. If the case of a leak, bubbles will
appear in the affected area. Do not use the appliance if a leak is found and contact your gas cylinder
provider or the after-sales team at Alice’s Garden.
6. Hold down one of the control buttons and keep it pressed down whilst turning it anti-clockwise to
reach the position «
HIGH FLAME
» (full strength). At the same time, quickly push the ignition (red
button situated between the two control buttons) up to 4 times in a row. This will light the burner. If
this doesn’t work, repeat the previous steps.
7. To light the other burner, repeat step 6.
8. If the burner does not light after two attempts, close the gas valve («
OFF
») and wait 5 minutes
before reattempting to light it.
9. If the burner doesn’t stay lit, repeat stage 6.
10. When the burner is alight, change the strength of the flame by turning the button between the buttons
«
HIGH FLAME
» / «
LOW FLAME
» (+strong/weak).
11. To turn the appliance off, shut off the gas flow by turning the valve button or the pressure regulator to «
OFF
».
Turn all the control buttons of the appliance clockwise to the «
OFF
» position once the flames have
gone out.
WARNING :
Before cooking the first piece of food, let the griddle heat up for 15 minutes, keep the
lid closed and all the burners on «
HIGH FLAME
». This first step will allow clean all elements of all
residues left from the production process.
WARNING :
If you smell gas, turn off the gas source and lift the lid of the griddle.
WARNINGS
• If one of the burners doesn’t light, turn the control button clockwise and shut off the gas flow from
the vale. Wait 5 minutes before reattempting the ignition process.
• After each use, shut off the flow of gas at the valve or at the pressure regulator.
• Clean all excess grease off the appliance with a damp cloth and soapy water before storing.
• Store the appliance in a clean, dry, environment.
• Do not store your gas cylinder indoors. Store it in a ventilated area, away from sunlight.
Summary of Contents for PH1002SB
Page 63: ......
