UPMIDIAS
Replacing
the
Battery
Pack |
17
Replacing the Battery Pack
WARNING:
Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
CAUTION:
To avoid damage to the computer, use only the battery
designed for this particular Alienware computer.
Procedure
1
Align the tabs on the battery with the slots on the computer base and place the
battery on the computer base.
2
Connect the battery cable to its connector on the system board.
3
Replace the screws that secure the battery to the computer base.
Postrequisites
1
Replace the base cover. See "Replacing the Base Cover" on page 15.
2
Follow the instructions in "After Working Inside Your Computer" on page 13.
Book.book Page 17 Friday, June 28, 2013 11:10 AM
