UPMIDIAS
Replacing the Macro Keyboard |
55
Replacing the Macro Keyboard
WARNING:
Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1
Slide the tab on the macro keyboard into the slot on the palm-rest assembly and
lower the macro keyboard into place.
2
Replace the screw that secures the macro keyboard to the computer base.
Postrequisites
1
Replace the keyboard. See "Replacing the Keyboard" on page 53.
2
Replace the base cover. See "Replacing the Base Cover" on page 15.
3
Replace the battery pack. See "Replacing the Battery Pack" on page 17.
4
Follow the instructions in "After Working Inside Your Computer" on page 13.
Book.book Page 55 Friday, June 28, 2013 11:10 AM
