UPMIDIAS
Removing
the
Processor
Module |
97
Procedure
1
To loosen the ZIF socket, use a small, flat-blade screwdriver to rotate the ZIF-socket
cam screw counterclockwise until it comes to the cam stop.
CAUTION:
To ensure maximum cooling for the processor module, do
not touch the heat-transfer areas on the processor thermal cooling
assembly. The oils in your skin can reduce the heat transfer capability
of the thermal pads.
CAUTION:
When removing the processor module, lift the module
straight up. Be careful not to bend the pins on the processor module.
2
Lift the processor module from the ZIF socket.
1
ZIF socket
2
ZIF-socket cam screw
2
1
Book.book Page 97 Friday, June 28, 2013 11:10 AM
