Next steps
1. Install the
.
2. Install the
.
3. Follow the procedure in
After working inside your computer
.
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
Before working inside your computer
2. Remove the
3. Remove the
About this task
The following image(s) indicate the location of the speakers and provides a visual representation of the removal procedure.
Steps
1. Disconnect the speaker cable from the system board.
2. Open the latch and disconnect the keyboard-controller board cable from the system board.
3. Peel the tape that secures the speaker cable to the palm-rest and keyboard assembly.
4. Remove the speaker cables from the routing guides on the palm-rest and keyboard assembly.
5. Lift the right and left speaker, along with its cable, off the palm-rest and keyboard assembly.
Installing the speakers
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
40
