Troubleshooting
8 - 14 Modules
8
Modules
Problem
Possible Cause - Solution
The Wireless LAN/
Bluetooth modules
cannot be detected.
The modules are off.
Check the LED indicator
to see if the WLAN/Bluetooth module is
on or off (see
“LED Indicators” on page 1 - 6
). If the LED indicator is off, then press the
Fn + F11 (WLAN)
or
Fn + F12 (Bluetooth)
key combination(s) in order to enable the
modules (see
“Function Keys” on page 1 - 8
).
The PC Camera modules
cannot be detected.
The module is off.
Press the
Fn + F10
key combination in order to enable the module (see
“Function Keys” on page 1 - 8
). Run the
BisonCap
program (see
“PC Camera” on
page 7 - 6
) to view the camera picture.
The Wireless LAN/
Bluetooth/ PC Camera
modules cannot be
configured.
The driver(s) for the module(s) have not been installed. Make sure you have installed the
driver for the appropriate module (see the instructions for the appropriate module in
“Modules & Options” on page 7 - 1
).
Summary of Contents for Sentia m3400
