Marine Transceiver
21
•
• BASIC OPERATIONS
BASIC OPERATIONS
Scan Operation
Set scan resume timer in the set mode.
1.
Press
[SCAN]
to start normal scan or priority scan.
• “SCAN” icon Blinks.
• “16” appears on the sub channel readout during a priority scan.
• When a signal is received, the scan pauses until the signal disappears, or resumes after pausing
5 seconds, depending on the set mode setting.
• Channel 16 is monitored during priority scan.
• Press
[
Y
]
/
[
Z
]
key to sequentially select TAG channels, change the scanning direction or manual-
ly resume the scan.
2.
Press either one of
[PTT]
,
[C/16]
,
[CH]
or
[TAG/FAV]
key to stop scanning.
Dual-Watch
Dual watch:
Watch and monitor in turns between cur-
rent channel and Channel 16.
In function menu setup select Dual-Watch mode (refer to
No.06 in P.23).
Hold
[SCAN/DUAL]
for 1.5 seconds to start dual watch,
“DUAL” blinks when dual watch, a beep tone sounds
when a signal is received on channel 16.
Press
[SCAN/DUAL]
or
[PTT]
key to cancel dual-watch.
Dual watch
Summary of Contents for DJ-MX1
Page 2: ......
Page 43: ...Marine Transceiver 29 VHF MARINE CHANNEL LIST VHF MARINE CHANNEL LIST...
Page 46: ...MEMO...
Page 47: ......
