11
5.1.3
Put the saddle at the correct height.
1. Fold the quick release (A) outward.
2. Bring the saddle (B) at the required height.
Caution! The saddle can be raised
a maximum of 12 cm (4.72 ”)
from the lowest position. The
higher the saddle, the less stable
the Alinker. Better use a lower
saddle on a larger frame than a
higher saddle on a smaller frame.
3. Fold the quick release (A) inward.
x
B
A
5.2 Adjust the handlebars
5.2.1
Select handlebars and a holder
The default handlebars for the Alinker are butterfly handlebars.
Contact your dealer
• Virtually every type of handlebars is suitable for the Alinker.
• Choose the handlebars most comfortable for you.
Choose the correct holder for the handlebars. Every type of holder can be mounted on the Alinker.
There are also holders with a quick release for easily taking the handlebars off the Alinker for
transport in the car.
5.2.2
Position of the handlebars
The handlebars are in the correct position when:
• Your arms are slightly bent when you are sitting up straight,
• Your hands can easily reach the handbrake,
• Walking, using the handbrake and steering feels easy.
Contact your dealer
The correct adjustment of the handlebars may vary dependent on the surrounding area
and your speed. Your dealer can advise you on this. The dealer can make you feel what
happens when you lower the saddle a bit and/or tilt the handlebars. The dealer can
also make you feel what happens when you lean forward and can push off better.
5.2.3
Put the handlebars in the correct position
The handlebars can be adjusted at two places:
1. The handlebars themselves can be turned.
2. The handlebars holder can be turned.
Adjust the Alinker
Summary of Contents for R-volution Large
Page 1: ...R volution User manual AL RV 1 0 EN R volution...
Page 2: ......