5. The adjusting screw determines the height of
the PTZ Dome Camera beneath the ceiling.
Turn the screw clockwise to extend the
camera, or turn the screw counterclockwise to
draw back the camera.
Note: When the inserting installation method is adopted, the three legs carry the total weight of the
camera. Thus, they should be firmly secured to avoid damage to the equipment and personnel. If the
surface to which the legs are secured is not level, adjust the adjusting screw of each leg to level the
camera.
6. Take the network module base out from the
camera unit pack.
7. Pull the steel wire out from the base.
8. Connect the steel wire to the hook on the PTZ
Dome Camera to prevent the accidental
falling of the camera.
18
