5 / 6
3.2.2
（
LODT
）
Lower limit value setting
：
Press
“
SET
”
key enter into lower limit value setting
，
Press
“
”
and
“
”
to adjust the number,choose the number you need,Press
“
SET
”
key to save
and enter into next function .As the picture shows:
：
3.2.3
（
OFFT
）
Automatically show down time setting
：
you can choose minute from 1 to 100,you can
also choose “0000”for not shut down .Default shutdown time is ten minutes. Press “SET” key to
enter into setting shut down automatically .Press
“
“ ”
and
“ ”
to adjust number,and then press “SET” key to save.
3.2.4
、
（
RESET
）
Factory reset: In this menu, press “SET” key to recover to factory resetting ,the
instrument shut down.
3.3 Test
3.3.1 Turn on .
3.3.2 Choose the parameter you need.
3.3.3 Choose the unit you need.
3.3.4 To make test with hands or other equipment,when in use, only use the test rod toggle the
tested object, from the static state to the required position, the surface of the measured object and
Summary of Contents for ATL-1
Page 3: ...3 6 ...
