ii.
Master/Slave Data Link
Connect the DMX output of the master fixture in the data chain with the DMX input of first
slave fixture. Always connect output with the input of next slave fixture until all slave fixtures
are connected.
2.3 Mounting the fixture
i. Truss
Mount
Fixture should be hung on truss structure using a mounting clamp. Always secure the fixture
with a secondary safety attachment.
ii. Wall
Mount
Refer to below diagram for wall mounting instruction. Before attaching the device, make sure
the installation surface can hold a minimum point load of 10 times the device’s weight.
____________________________________________________________________________
VBAR 270 User Manual Page 6 of 19
