W 3 1 S E R I E S
H I G H P R E S S U R E B R E A T H I N G A I R C O M P R E S S O R
©ALKIN Kompresör Sanayi ve Ticaret Limited Şirketi
39
Appropriate tool is selected depending on the component, dual tighten the component according
to their torque values.
Check with foam water for leaks. Mind electrical components. Wipe the foam water off the
compressor.
2.5.7 Serpentines, Intercoolers and Aftercooler, Flywheel Cleaning
Instruction no
07
Instruction name
Serpentines, Intercoolers and Aftercooler,
Flywheel Cleaning
List of tools required
Cloth
No of persons required
1 person
Estimated Completion Time
5 minutes
Parts list to be used in replacement kit
None
Clean dust on serpentines, intercoolers and aftercooler, flywheel with 6-7 bar pressurized air.
Wipe if necessary.
2.5.8 Current Check
Instruction no
08
Instruction name
Current Check
List of tools required
Amperemeter
No of persons required
1 person
Estimated Completion Time
5 minutes
Parts list to be used in replacement kit
None
Check with an amperemeter at max. load for conformity with the motor power and current data
2.5.9 Safety Valve Check
Instruction no
09
Instruction name
Safety Valve Check
List of tools required
foam water
No of persons required
1 person
Estimated Completion Time
10 minutes
Parts list to be used in replacement kit
None
Start the compressors. While it is working, put foam water on valves and check for leaks. Replace
valves if necessary.
2.5.9.1 Safety Valve Replace
Instruction no
09-01
Instruction name
Safety Valve Replacement Instructions
List of tools required
appropriate tools, foam water
No of persons required
1 person
Estimated Completion Time
10 minutes
Parts list to be used in replacement kit
None
Remove the problematic safety valve with the appropriate tool. Start the compressor and verify
teflon tape parts are removed from valve hole. Then stop the compressor.
