W 3 1 S E R I E S
H I G H P R E S S U R E B R E A T H I N G A I R C O M P R E S S O R
©ALKIN Kompresör Sanayi ve Ticaret Limited Şirketi
44
30 minutes after restarting the compressor, stop it, let it cool down to ambient temperature and
retighten valve screws and cap nuts. Otherwise, valves could work loose due to settings of the
gaskets.
Remove and check the valves every 1000 operating hours.
Replace the valves every 2000 operating hours to avoid fatigue failure
.
2.6 Abrasion Limits
Crankcase:
Con-rod side : Ø22 / Ø21.99
Bearings Side : Ø35 / Ø35.005
Ø30 / Ø30.005
Con-rods:
Crankshaft side : Ø22.04 / Ø22.05
Piston side
: Ø14 / Ø14.01
Piston pin
: Ø14 / Ø13.99
Piston:
1. stg.
: Ø66.68 / Ø66.63
2. stg.
: Ø38 / Ø37.95
3. stg.
: Ø14 / Ø13.95
Cylinder
1. stg. cylinder : Ø66.68 / Ø66.73
2. stg. cylinder : Ø38 / Ø38.04
3. stg. cylinder : Ø14 / Ø14.04