ALF-13131-E-02
All-Flo
9
PERFORMANCE CURVES
PERFORMANCE CURVE (1/2” RUBBER)*
Performance Specifications
Max. Flow:
9 gpm (34.1 lpm)
Max. Air Pressure:
120 psi (8.3 bar)
Max. Solids:
3
/
8
” (9.5 mm)
Max. Suction Lift Dry:
13 ft-H
2
O (4.0 m-H
2
O)
Max. Suction Lift Wet:
25 ft-H
2
O (7.6 m-H
2
O)
Weight:
AL-10 lbs (4.5 kg)/SS-20 lbs (9.1 kg)
Air Inlet:
1/4” FNPT
Liquid Inlet:
½” FNPT/BSP
Liquid Outlet:
½” FNPT/BSP
Height:
11.2” (284 mm)
Width:
10.3” (262 mm)
Depth:
6.4” (163 mm)**
Performance Specifications
Max. Flow:
9 gpm (34.1 lpm)
Max. Air Pressure:
120 psi (8.3 bar)
Max. Solids:
3
/
8
” (9.5 mm)
Max. Suction Lift Dry:
13 ft-H
2
O (4.0 m-H
2
O)
Max. Suction Lift Wet:
25 ft-H
2
O (7.6 m-H
2
O)
Weight:
AL-10 lbs (4.5 kg)/SS-20 lbs (9.1 kg)
Air Inlet:
1/4” FNPT
Liquid Inlet:
½” FNPT/BSP
Liquid Outlet:
½” FNPT/BSP
Height:
11.2” (284 mm)
Width:
10.3” (262 mm)
Depth:
6.4” (163 mm)**
Performance Specifications
Max. Flow:
9 gpm (34.1 lpm)
Max. Air Pressure:
120 psi (8.3 bar)
Max. Solids:
3
/
8
” (9.5 mm)
Max. Suction Lift Dry:
13 ft-H
2
O (4.0 m-H
2
O)
Max. Suction Lift Wet:
25 ft-H
2
O (7.6 m-H
2
O)
Weight:
AL-10 lbs (4.5 kg)/SS-20 lbs (9.1 kg)
Air Inlet:
1/4” FNPT
Liquid Inlet:
½” FNPT/BSP
Liquid Outlet:
½” FNPT/BSP
Height:
11.2” (284 mm)
Width:
10.3” (262 mm)
Depth:
6.4” (163 mm)**
5
SECTION
*Flow rates indicated on all three charts shown were determined by pumping water at flooded suction, using an aluminum intermediate fitted pump.
For optimum life and performance, pumps should be specified so that daily operation parameters will fall in the center of the pump performance curve.
**Polypropylene intermediate is 7.3” (185mm) deep.
PERFORMANCE CURVE (1/2” TPE)*
PERFORMANCE CURVE (1/2” PTFE)*
