Setting the Meter
After replacing the battery, you should update the time and date setting.
The GlucoDr SuperSensor Meter comes with the time, date, alarm(0), average day(7d) and
unit of measurement presents (mg/dL) preset. However, if you need to change the setting
of the meter, or if you replace the battery, you need to enter the SET MODE and reset them.
It is important to set the correct time and date. Having the correct time and date of each
blood glucose test result will help you and your healthcare professional to track changes in
your blood glucose level.
1
To exit the SET MODE at any time, press and
hold the power button for 3 seconds. The
settings you have already made will be saved.
With the meter turned on, press and hold the power button until "SET"
appears on the meter. Release the power button to enter the SET MODE.
The Year
fl
ashes.
Press and Hold the Power Button for 5 Seconds
Press and release the SIDE(UP/DOWN button) buttons to adjust the year
until the correct year appears on the meter display. If you press and release
the power button in the SET MODE, the meter will advance to the Hour
Setting.
Set the Year
