FEEDING MODE
Press and hold for 3 seconds to enter time delay start mode, and Fd10 will
appear on the screen. The devise will start to work after ten minutes. Press and
hold for 3 seconds to exit feeding mode.
LOCK FUNCTION
Press and hold to lock the keys - LOC will appear on the screen. Press and
hold to unlock the keys.
AUTOMATIC MEMORY FUNCTION
If the power to the controller is accidentally switched off, the unit will recover
the last settings when the controller is switched back on.
ERROR REPORT
if the pump is run dry without water for more than 30 seconds, the unit will
temporarily switch off, attempting to restart after 3 seconds. This will repeat 5
times before power to the unit will shut off completely.
Er03
- this will display on the screen when the pump has been
automatically stopped.
Er02
- this will display if the pump stops working due to a blockage.
CODE
DEFINITION
STATUS
TROUBLESHOOT
P000
Power
Normal
Sp01 - 10
Flow Rate Level
Normal
Fd10-01
Feeding Mode
Normal
_LOC
Lock
Normal
Er01
Over or Under Voltage
Warning
Check the voltage is
corect
Er02
Pump Lock Protection
Warning
Check for blockage in the
pump
Er03
Pump Idling Protection
Warning
1. Check if the pump is
being run dry
2. Check wihether there is
air in the pump
Er04
Overheating
Warning
Clean the pump
Er05
Short Circuit Current
Warning
Check the controller
