HERA LS Series CD/DVD Duplication System / User Manual
12
Note:
The bit-by-bit comparison will only apply on all BDs, DVDs and Data CDs. The readability check
will be applied for other formats like Audio CDs, CD+G, and Video CDs discs due to their lack of
error correction mechanisms.
5. Test + Copy (page 28)
Use the
Test + Copy
menu option to simulate the copying process initially. Then, the autoloader performs
the actual copy process on the blank disc(s) that passed the simulation. For the blank disc(s) that didn’t
pass the simulation, the autoloader will place it/them to the Reject Area.
6. Copy + Compare (page 28)
Use the
Copy + Compare
menu option to make 100% reliable copies. After the copy process is done, the
autoloader automatically compares the copies from the content of your original master disc.
7. Select Burn Speed (page 28)
Use the
Select Burn Speed
menu option or the
Speed
quick key to adjust the duplication speed for the
various blank disc formats. For additional information, see “Select Burn Speed” on page 28.
8. Select Source (page 29)
Use the
Select Source
menu or the
Source
quick key to tell the system where the content of the master
disc resides during duplication. At this point, Hard Drive is the only place where the content of the master
disc resides during duplication. For additional information, see “Select Source” on page 29.
9. Master Mode (page 30)
Use the Master Mode menu to select either Single Master Mode(SM) or Multi Master Mode (MM). For
more information on those modes, see “Single Master and Multi Master Modes” on page 17. For more
information on using the Master Mode menu, see “Master Mode” on page 30
10. Erase RW (page 30)
Use the Erase RW menu to erase your Rewritable discs. There are two options:
Full Erase:
This option erases the entire disc, destroying all previously written data in the
process.
Quick Erase:
This option erases the index (TOC) of the Rewritable disc, not the data section. It
is much faster than Full Erase. However, the data section is still recoverable. If you prefer the old
content not to be recovered for security purpose, please perform Full Erase.
