HERA LS Series CD/DVD Duplication System / User Manual
16
18. Shutdown (page 50)
Use this menu option to turn off your system. Once you see the “Ready to Power Off” message, you can
safely turn off the machine using the power switch. Turning off your autoloader without performing this
function increases the risk of damaging it.
5. Introduction to Manage Accounts
This feature allows the administrator to:
Create user accounts and passwords to prevent unauthorized use of the autoloader.
Edit existing user account information, including name and password.
Delete existing user account(s).
Enable or disable “Manage Accounts”.
Manage Accounts is disabled by default. Prior to activating the “Manage Accounts” feature, the autoloader
recognizes all users as the Administrator.
The pre-defined password for this function is “0000.”
By adding additional users, each individual user has his/her own settings and only has access to the hard drive
partitions that the individual user loaded to the hard drive. No one else can access their hard drive partitions other
than the Administrator.
For example, if USER 1 logs-in and loads a master disc to hard drive Partition A, when USER 2 logs-in, USER 2
will not have access to any partitions loaded by USER 1; which includes partition A.
To take advantage of this feature, follow these instructions:
Change the Administrator password. Refer to “Edit User Info” on page 49 for additional information.
Create a User Name and Password for each authorized person on this autoloader. Refer to “Create
User” on page 48 for additional information.
Enable the “Manage Accounts” feature by turning on the “Password on Bootup” setting. Refer to
“Password on Bootup” on page 50 for additional information.
Note: This autoloader comes with a standard license that allows you to create up to 32 users. However, if
you desire to create more than 32 users, please contact Tech Support Service regarding our special 64 user
license pack.
For instructions on how to use “Manage accounts”, see “Manage Accounts” on page 47
.
6. Single Master and Multi Master Mode
There are two ways to make copies using the autoloader:
Single Master Mode:
This mode requires that a single master disc is loaded onto the hard drive prior to initiating the duplication
process. This mode is ideal if your job involves one or very few master disc(s).
Multi Master Mode (Batch Mode):
This mode does not require you to manually load your master. Simply place the master disc(s) on top of
the stack of blank discs needed for that particular job of the master disc. This mode is ideal if you have
numerous master discs and fewer copies for each master disc.
