HERA LS Series CD/DVD Duplication System / User Manual
30
Duplicator B.30
1. Copy (SM)
Duplicator B.30
10. Erase RW
Counter:
No Counter
Loader Processing
Drive 1 <- Input Bin 1
Processing ...
Please Wait
Quick Erasing...
0/25
Use the
Erase RW
menu to erase your Rewritable discs.
Use the
Up or
Down
button to find the
10. Erase RW
menu.
Press the
Enter button on
10. Erase RW
to enter the menu and you will
see the following screens:
Erase RW
Quick Erase
There are two options:
Full Erase:
This option erases the entire disc, destroying
all previously written data in the process.
Quick Erase:
This option erases the index (TOC) of the
Rewritable disc, not the data section. It is much faster than Full
Use the
Up or
Down buttons to select between the two options and press the
Enter button to continue.
Follow the instructions shown in “Setting Counters” on page 18 to continue. Once
the counters have been set, press the
Enter button to confirm.
The Robotic Arm will go out and pick the discs to be erased from the Input
Spindles and place them into the drives. As soon as the drives are all full, or
the number programmed into the counter is reached, you will see the
following:
The system will check all discs in the drive and prepare them to be erased. As
soon as the checking process completes, the Erase RW process starts.
The “0” indicates that zero discs have been erased so far. The “25”
indicates the number programmed into the counter. Once all the discs have
been erased, you will see one of these PASS/FAIL screens:
Counter Specified
No Counter Specified
PASS 25 FAIL 0
Job Completed! Press OK to Finish
or:
Input Bin Empty (20)
Reset Hoppers?
