HERA LS Series CD/DVD Duplication System / User Manual
37
Setup
1. Language
Language:
English
Language:
Espanol
Setup
2. Read Error Skip
Read Error Skip
On
Read Error Skip
Off
Setup
3. CD Writing Mode
CD Writing Mode
Disc at Once
CD Writing Mode
Track at Once
Counter
AUTOCOPY Enabled
ISRC
DVD+R Compatibility Mode
Disable Drives
CD Overburn
Max Failure per Job
Max Failure per Drive
Each of these options is discussed in its own subsection.
13.1 Language
This setting allows you to choose the language that you prefer to use when navigating the autoloader. The
autoloader supports multiple languages.
Use the
Up or
Down
button to select the Language menu and press the
Enter
button to enter that menu.
Use the
Up or
Down
button to select between the languages and press the
Enter
button to select that option.
13.2 Read Error Skip
Normally, when the autoloader encounters a read error while reading your master disc, the duplication is
aborted and all the recordable media in the writers are ruined. However, if you believe that your master disc
has a small, insignificant error due to physical damage, you can enable this setting to allow the autoloader to
skip any read errors it encounters.
Note:
This function does not fix the error; it only skips it to make the rest of the data readable.
Use the
Up or
Down
button to select the
Read Error Skip
menu and
press the
Enter
button to enter that menu.
Use the
Up or
Down
button to select whether
Read Error Skip
is on or off,
and press the
Enter
button to select that option.
13.3 CD Writing Mode
This setting allows you to select which mode to use to duplicate a CD; “Disc at Once” or “Track at Once.”
Unless you understand completely what these modes are, we strongly suggest you to set it to “Disc at Once.”
Use the
Up or
Down
button to select the
CD Writing Mode
menu and
press the
Enter
button to enter that menu.
