HERA LS Series CD/DVD Duplication System / User Manual
43
Max Failure per Job
[030] OK?
Setup
14. Max Failure per Job
Setup
15.Max Failure per Drive
Max Failure per Drive
[030] OK?
Use this setting to set the maximum failures the autoloader is allowed per job. Once the maximum is reached, the
job will be stopped. The default value for this setting is 30.
Use the
Up or Down
button to select the
Max Failure per Job
menu and
press the
ENT/Enter
button to enter that menu.
You can select numbers between 1 to 999 by pressing the
Up or Down
button:
To specify the number of maximum failures per job, you need to enter/input a
three-digit number.
If you need to specify a number that is less than three digits, fill the leading spaces with zeros (any leading zeros
will be skipped). Examples of three-digit numbers are “034” (thirty four), or “010” (ten).
To enter the number, you need to use the
Up or Down button
to select the number for each digit and use the
ENT/Enter
button or the
ESC/Escape
button to move the cursor position right or left. Once you've finished, move
the cursor to “OK” and press the
ENT/Enter
button. For example, if you want to specify a counter value of 21
(twenty one). The three-digit value would be “021.” To input the desired quantity, do the following:
Make sure the cursor is located at the first position (First blinking position):
Press the
Down
button repeatedly until “0” is displayed.
Press
ENT/Enter
button once to move the cursor to the next position.
Press the
Down
button repeatedly until “2” is displayed.
Press
ENT/Enter
button once to move the cursor to the next position.
Press the
Down
button repeatedly until “1” is displayed.
Now, “021” is displayed, press
ENT/Enter
button once and the cursor moves to “OK”.
Then, press the
ENT/Enter
button once to submit your maximum failures per job.
13.15 Max Failure per Drive
Use this setting to set the maximum failures each drive is allowed per job. Once the maximum is reached for any
particular drive, that drive will be disabled for the remainder of the job. The default value for this setting is 5.
Use the
Up or Down
button to select the 14.
Max Failure per Drive
menu
and press the
ENT/Enter
button to enter that menu.
You can select numbers between 1 to 999 by pressing the
Up or Down
button:
To specify the number of maximum failures per drive, you need to enter/input
a three-digit number.
If you need to specify a number that is less than three digits, fill the leading spaces with zeros (any leading zeros
will be skipped). Examples of three-digit numbers are “034” (thirty four), or “010” (ten).
To enter the number, you need to use the
Up or Down button
to select the number for each digit and use the
ENT/Enter
button or the
ESC/Escape
button to move the cursor position right or left. Once you've finished, move
the cursor to “OK” and press the
ENT/Enter
button. For example, if you want to specify a counter value of 21
(twenty one). The three-digit value would be “021.” To input the desired quantity, do the following:
Make sure the cursor is located at the first position (First blinking position):
Press the
Down
button repeatedly until “0” is displayed.
