HERA Series CD/DVD Duplication System / User Manual
18
Counter:
Specify Counter
Specify Counter:
[0 ] OK?
Counter:
No Counter
first job, unload the completed job, and fill the drive trays with blank discs for the next job.
The robotic arm will continue to load media into the drives as the duplicated discs are placed in
the Output Bin. Once a writer drive (any drive) detects another Master disc, the same process is
repeated for the new Master disc.
7. Setting Counters and Assigning Names
Two frequently used tasks are setting counters and assigning names to partitions. Directions for these
tasks are given here.
7.1 Setting Counters
The autoloader frequently gives you the option to set a counter so that the machine can keep track of the
number of copies made. Follow these steps when you see a Counter Selection Menu:
The Counter Selection Menu lets you set how many copies you want to
make for your project. The Counter Selection feature tells the autoloader
to count the number of successful copies you have made and stop the
job when the desired number of copies has been reached.
You can select “No Counter” if you prefer to copy continuously with no interruption. (It will still count the
number of copies, but it will not notify you when to stop.) To select the “No Counter”, simply press the
Enter
button when you see the screen above.
Or, you can select “Specify Counter” between 1 to 9999 by pressing the
Up or
Down button
to go to
the Specify Counter menu:
Press the
Enter
button to select this option. You will see the next
Specify Counter
menu.
To specify the number of copies for your project, you need to enter/input a
four-digit number.
If you need to specify a number that is less than four digits, fill the leading spaces with zeros (any leading
zeros will be skipped). Examples of four-digit numbers are “0234” (two hundred and thirty four), or “0010”
(ten).
To enter the number, you need to use the
Up or
Down button
to select the number for each digit
and use the
Enter
button or the
ESC
button to move the cursor position right or left. Once you've
finished, move the cursor to “OK” and press the
Enter
button. For example, if you want to specify a
counter value of 21 (twenty one). The 4-digit value would be “0021.” To input the desired quantity, do the
following:
Make sure the cursor is located at the first position (First blinking position):
Press the
Down
button repeatedly until “0” is displayed.
Press
Enter
button once to move the cursor to the next position.
Press the
Down
button repeatedly until “0” is displayed.
Press
Enter
button once to move the cursor to the next position.
Specify Counter:
[0 ] OK?
