HERA Series CD/DVD Duplication System / User Manual
39
Setting Saved!
Please Restart
System Utilities
1. Disc Info
Disc Info
Please Insert Disc
Disc Info
3 Disc Detected, GO?
Once the changes are saved, you shall see the “Please Restart” screen
and restart the system to have the new setting take effect.
12. System Utilities
System Utilities is used to provide information pertaining to the autoloader as well as modification to
maintain proper functioning. The System Utilities are:
Disc Info
System Info
Device Info
Load Default
Update Firmware
12.1 Disc Info
If you are uncertain about the type of blank recordable media you are using, the Disc Info function can
help you identify the type of disc and provide information about the data encoded on the disc. For blank
recordable discs, it will tell you the media's format, capacity, manufacture ID, and the Media's certified
writing speed.
Note:
The Disc Info function does not use the robotic capabilities of the system. You must
manually insert the discs into the drives.
Use the
Up or
Down
button to select the
Disc Info
menu and
press the
Enter
button to enter that menu. The system will
proceed to the
Please Insert Disc
menu.
Place your disc(s) into the drives.
After a few seconds, the system will detect the discs and ask
you if you want to proceed. Wait until all of your discs have
been detected and press the
Enter
button to continue.
The information you see will depend on whether the disc that you inserted has data written on it or if it
is blank. In this example, three discs have been loaded:
Tray 1 has a CD-ROM with data encoded onto it.
Tray 2 has a blank 24x CD-RW media
Tray 3 has a blank 8x DVD-R Media
The results are:
A data CD was placed in the top tray
1. CD 21M Data
1 Session 1Trk
- The “1.” Indicates that the information is for the media inserted in
the tray 1.
- The “CD” indicates that the media inserted is a CD-ROM
