2017 Fitness Spa
LTR20171146, Rev. D
Pr
eparing f
or
Your Ne
w P
or
tab
le Spa
www.calspas.com
13
If you have tried priming the pump several times
unsuccessfully using the control panel, you can
bleed the air from the pump manually.
1. Shut off the power to the spa.
2. Using a Phillips screwdriver, remove the front
panel from the spa and locate the pump.
3. Close the gate valve on the discharge side of
the pump (if your spa is installed with one.)
4. Turn the bleeder valve counter clockwise
with a small pair of pliers until the air has
been released from the pump.
5. If this is unsuccessful, loosen the union nut
on side of the pump with channel locks.
When air is bled out, tighten the nut.
6. Turn on power to the spa and press the
JETS button. If there is still air trapped in
the pump, repeat steps 2 through 5 until the
pump primes.
Bleeding Air from the Pump
Summary of Contents for SWIM-PRO SERIES
