23
Horn Button
When you press the horn button, the horn sounds.
Charger Socket
This socket is only used for electric wheelchair charging and special programmer. This socket cannot be
used as the power supply of any other electrical devices. If it is connected with other electrical devices, it
may damage the control system or affect EMC performance of the electric wheelchair.
Self-diagnosis of control system
The power indicator flashes rapidly (even when the joystick is released), and the safety circuit of the
control system has started to operate to prevent the control system from moving the wheelchair and
causing system error. That is, M7084 has detected that there is a problem in the circuit system of
wheelchair, then please follow the following procedures:
●
Turn off the control system.
●
Please make sure that all connectors on the electric wheelchair and the control system are firmly
connected.
●
Check the battery condition.
●
If the problem is not found, please use the self-diagnosis function.
●
Please restart the control system, and then try to drive the wheelchair. If the protection circuit
works again, please turn off and stop using the wheelchair.
