49
●
Check all electrical connections. Make sure they are tight and are not corroded. Refer to the
battery wiring label for the correct wiring layout.
WARNING! Even though the power chair has passed the necessary testing
requirements for ingress of liquids, you should keep electrical connections away from
sources of dampness, including direct exposure to water or bodily fluids and
incontinence. Check electrical components frequently for signs of corrosion and
replace as necessary.
Daily Checks
●
With the controller turned off, check the joystick. Make sure it is not bent or damaged and that it
returns to the neutral position when you release it. Check the rubber boot around the base of the
controller for damage. Visually inspect the boot. Do not handle or try to repair it. See an
authorized Provider if there is a problem.
●
Visually inspect the controller harness. Make sure that it is not frayed, cut, or has any wires
exposed. See an authorized Provider if there is a problem.
●
Check for flat spots on solid tires. Flat spots could adversely affect stability.
●
Inspect the seating system, armrests, and front riggings for loose hardware, stress points or
damage. See your authorized Provider if there is a problem.
