Montagehinweise / Mounting information / Consigne de montage / Montagetip
2022-08-03 / 8217545 / B
5 von 12
|
NORMBAU
Care and cleaning instructions
Risk of injury
Improper cleaning can cause damage to the surface and lead to injuries.
Cavere Care | Nylon Care
Powder-coated products from NORMBAU have a smooth, easy-to-clean surface. In
order to maintain the decorative design and color of the coating of our products for
years, cleaning and care must be carried out professionally. Slightly adhering dirt
can be removed with a sponge and water to which a neutral cleaning agent (e.g.
dishwashing liquid) is added. Immediately after each cleaning process, rinse with
pure, cold water. A chamois or microfiber cloth removes the remaining wiping marks
or drops of water. Abrasive or strong acidic/alkaline cleaning agents should never
be used. With metallic coatings, heavy soiling should be cleaned as soon as
possible, since dried and old dirt can often only be removed abrasively and with the
risk of damage to the powder coating or a change in color. Common wiping
disinfectants can be used.
Inox Care
Stainless steel products from NORMBAU have a smooth, high-gloss, easy-to-clean
surface. The material has proven itself both with frequent external loads and when
used in a corrosive environment. However, it should be noted that stainless steel
can also rust without care and by the action of aggressive agents. Damage to the
passive protective layer created by oxygen must be avoided. Dirty parts can be
cleaned with a soft, damp cloth or sponge. If heavily soiled, we recommend a
commercially available detergent. Common wiping disinfectants can be used.
Cleaners with hydrochloric acid, citric acid and acetic acid (tile cleaner) and cleaning
sponges made of steel wool are unsuitable for use on stainless steel.
Disposal
Disposal of the product and packaging is subject to the relevant national regulations
and must be disposed of in the prescribed manner.
