- 25 -
CISA MYEVO KEYPAD
MASTER CODE
The
Master Code
is an 8-digit code which allows users to:
• open the door when it is locked
• programme the CISA MyEVO keypad and lock when the door is open.
The CISA MyEVO keypad has a factory set
Master Code
: 12345678
The CISA MyEVO keypad is supplied with a card with the factory set
Master Code
(FACTORY
MASTER CODE) and a space for users to write the new Master Code (PERSONAL MASTER
CODE). This card is purely a reminder for the door administrator.
Please keep the card in a
safe place
.
It is mandatory to create a new Master Code to become the sole administrator of the
door and exit CONSTRUCTION MODE.
CREATING A NEW MASTER CODE
It is not possible to create a
Master Code which begins with
0000
This must be done with the DOOR OPEN.
1. Press the CISA key to activate the keypad.
2. Enter the
Master Code
(FACTORY MASTER CODE 12345678 or PERSONAL MASTER CODE)
3. Press 5
4. Enter the
new 8-digit Master Code
5. Re-enter the
new 8-digit Master Code
ESTABLISHING THE LENGTH OF USER CODES
User Codes can have a minimum of 4 and a maximum of 8 numbers (the factory code has 4
numbers).
Once the length has been set, all User Codes generated must be of the same length.
It is not possible to create several User Codes of different lengths.
It is possible to change the length of the User Code only if no codes have been set. If codes
have already been set, follow the procedure DELETING ALL USER CODES (PAGE 28)
It will then be possible to continue as follows:
This must be done with the DOOR OPEN.
1. Press the CISA key to activate the keypad
2. Enter the
Master Code
of 8 digits
3. Press 4
4. Enter the desired numbers (4 - 8)
