1 General information
© 2022 Interflex Datensysteme GmbH | IF Distributors | 06.22
5
1.3 Target group
This document is solely intended for
experts
and
people trained in electrical engineering
.
Only perform the actions described in this document if you belong to this target group.
Interflex Datensysteme GmbH is not liable for any damages caused by improper installation
or initial operation.
1.4 Intended use
IF distributors are designed for controlling terminals and for monitoring inputs such as door opening
push-buttons. IF distributors are designed for fixed installation in dry rooms.
Any other use is not in accordance with the intended purpose and therefore not permitted.
Modifications to the device are not permitted.
1.5 Safety
WARNING
Danger to life due to electric shock
People can be seriously hurt or killed through physical contact with live parts (e.g. 230 V~).
u
Make sure that you cannot touch live lines during installation.
u
Switch off the power supply of the devices.
u
Please observe the applicable safety regulations and take all precautionary measures to
ensure safe installation.
NOTICE
Property damage due to transient overvoltages
Transient overvoltages (surges, bursts) in the energy supply network can lead to malfunctions and
failures.
u
Use suitable mains filters that are professionally installed and operated.
NOTICE
Damage due to electrostatic discharge (ESD)
Electrical components and modules can be damaged by only slight, hardly noticeable electrostatic
discharge (ESD) without this becoming immediately obvious. ESD damages result in malfunctions
and even failure of the device.
u
Make sure that effective protective measures against electrostatic discharge are in place when
working on the open device.
