6 Technical specifications
© 2022 Interflex Datensysteme GmbH | IF-5835 Time Recording Terminal | 07.22
26
3. Enter the address under which the
IF6040 Pki Service
can be reached.
4. Enter the address under which the relevant
IF6040 Peripherals Server [Id]
service can be
reached.
Enable the ports in the firewall. You can also see the addresses when starting, e.g., the
service via the “DOS box”.
Supplementary entries for the controller host protocol
If, after system updates, you use the new controller with the controller host protocol, additional
steps are necessary.
u
Add the following passage to the customer-specific configuration file
IFTls.exe_custom.config
:
<ChpRestVersionServiceProxy Run="true" Name="version" />
<ChpRestServiceProxy Run="true" Name="data" />
<ChpPkiServiceProxy Run="true" Name="pki" />
<ChpLifecheckActionServiceProxy Run="true" Name="action" />
In case of new installations this passage is already integrated. They must be manually inserted in
the updated installations (for this application), because customer-specific configuration files are
generally not adapted automatically.
Configuring the PKI service
Use the file
IFPki.exe_custom.config
on the PKI server computer. Pay attention to the
comments in the configuration file.
1. Enter the required certificate names
Replace the
DummyName
entry in case of newly installed files
2. Activate adjusted lines (remove comments)
6 Technical specifications
Power supply
Nominal voltage
18 to 24 V AC/DC
Power supply via Ethernet
PoE IEEE 802.3at of power class 0 (up to 13 W)
Power consumption
Max. 12 VA
Fuse
PTC resistor
Equipment
Credential reader
RFID: MIFARE® Classic/DESFire LEGIC® advant/prime
