Right Hand
OPENING IN
OPENING OUT
Outside
Outside
Left Hand
OPENING OUT
OPENING IN
990MF Handing/Function Adjustment
V Series handing adjustment
(Inside handle free)
To set for left hand
Push in and turn clockwise. Set adjuster as shown.
To set for right hand
Push in and turn anti-clockwise. Set adjuster as
shown.
V9/V10/V55/V56
The Locking Bar must be down before installing.
D & S Series Deadlocks & Sliding door locks
Set adjuster as shown.
To set for C Series
(Both handles lockable)
Supplied unhanded. Fit cylinder or turn adaptor to
appropriate sides. When only one cylinder or turn is
used fit plug into unused hole.
V SERIES
LH
FREE
LOCKABLE
V SERIES
RH
FREE
LOCKABLE
C SERIES
LOCKABLE
Handing/Function
Adjuster
1.
To Reverse Bolt
2.
Remove outer forend.
Handing Guide
Pull & rotate bolt through 180° clockwise.
Allegion (New Zealand) Limited
Phone
0800 477 869
Website www.allegion.co.nz
12/2013
Allegion (Australia) Pty Ltd
Phone
1800 098 094
Website www.allegion.com.au
990MF Mortice Lock
Installation Instructions
