Name and function of each part
Handle
Can open the door at anytime only
by pulling down this handle
Battery cover
Push up to open the battery cover
[N], [S], [ ] Button
˙[N] : Registration or deletion of PIN
code, Card in normal mode
˙[S] : Registration or deletion of PIN
code, Card in safety mode
˙[ ] : Registration or deletion of
optional RF communication
pack
Communication pack socket
Auto / Manual mode switch
[
Auto lock
] Mode
Door will be locked automatically
after closing
[
Manual lock
] Mode
Door will be locked by pressing
manual lock button after closing
Indicator lamp
[Manual locking] button
Button to lock the door manually
[Double locking] button
Button to set double locking mode
1.
Front Ass`y
2.
Back Ass`y
MI-
5600
Panic release handle type
It facilitates escape with a simple action of lever down.
High reliable mechanical mortise lock type
Free-direction mortise lock type
The product can be installed in a left or right handed configuration.
Auto relock function
If users do not open the door after unlocking the device it will
lock itself automatically.
Volume control
8 levels of volume.
One touch mute function
Door will not emit any sound when mute is activated.
Low battery indicator and alarm for battery
replacement
Easy to check battery status with three step level indicator and alarm
when battery replacement is required.
Trespass alarm function
When the door is opened by force an alarm will sound.
Prevent mischief & hacking
After multiple incorrect attempted entries an alarm will sound and all
the functions of the lock will be suspended for three minutes. The alarm
activated after three incorrect PIN/card entries.
Three
way solution (PIN code, Card key, Override key)
Disable function when missing PIN code or card key
Automatically deleting old PIN code or card key information
when registering new one.
Random security coding function
When you enter your home with other people, you may not
want to show PIN code to them. In this case, you may press
any numbers randomly without limitation and then enter your
PIN code at the end.
Auto lock function
When the door is closed, it will be locked automatically in auto
lock mode.
Handle
Can open the door by pushing down
it after unlocking with PIN code or
Card key
Status indicator
Indicate operation status and
checking battery capacity
˙ Remaining battery 20%
˙ Remaining battery 50%
˙ Remaining battery 80%
Touch Keypad
Override key
Unlock the door with override
key manually
External emergency power
supply terminal
When battery does not operate,
product may be operated and
unlocked by contacting a 9V battery
on terminal located outside
Card key touch plate
Touch the registered card key to
unlock the door
Wireless connection
indicator
Lock / Unlock lamp
Indicate lock / unlock status
Battery replacement
indicator
When the battery is low, the
red light blinks. Please change
batteries
USER MANUAL
Notice
Please read this manual before installation and
operation.
Safety precautions
Product features
Do not disassemble or alter the lock.
Disassembling the door lock may damage the product. Damages to
the product caused by unauthorized persons may void the warranty.
If the product generates harmful gases and
smoke.
Please remove the batteries immediately from the product, if you
do not take this step immediately, the product may suffer severe
damage.
Please keep the product away from water or any
liquids.
If the product is exposed to water or liquids, please wipe the
moisture off with a soft cloth. If moisture or foreign materials
penetrate the product, remove the batteries immediately.
Please check the batteries every 6 months for
leaks/cleanliness.
If leakage is discovered, please wipe out with a dry cloth and replace
with new batteries. In case of exposure to leakage, wash affected
skin area with soap and water immediately.
Do not clean the product with flammable
materials such as alcohol, benzene or thinners.
Such materials may damage the surface of the lock or cause a fire.
Batteries should not be exposed directly to heat
source or submerged in water, because they may
leak or explode, resulting in severe damage.
Do not use damaged batteries.
Do not allow the battery electrodes to contact
metals such as keys, as the battery may overheat,
causing explosion or severe damage.
Please do not close the door with the deadbolt in
the locked position.
It may damage the product or cause a malfunction.
Do not force to pull the front cover.
It may damage the product or cause a malfunction.
Do not mix old and new batteries, or use different
types of batteries.
The battery life is getting shorter and it may cause leaks or
explosion.
It may damage the product when installed on a
heavy dew condensation door.
Dew condensation; small drops of water that form when warm air
touches a cold surface. Please check the environment of installation
area. Heavy dew condensation may damage the product or cause a
malfunction.
Product composition and components
①
②
③
④
Name
Product specification
Remark
①
Front Ass`y
84mm(W) X 260mm(H) X 21mm(D)
Including rubber pad
②
Back Ass`y
82mm(W) X 242mm(H) X 34mm(D)
③
Back bracket
70mm(W) X 119.5mm(H) X 6.6mm(D)
④
Mortise lock
105.4mm(W) X 240mm(H) X 24mm(D)
⑤
Strike
24mm(W) X 240mm(H) X 4.5mm(D)
⑥
Strike housing
24mm(W) X 239.8mm(H) X 19.5mm(D)
⑦
Handle shaft
101.7mm(W) X 8mm(H) X 8mm(D)
⑧
Card key
ISO card, Tag key
⑨
Handle shaft clip
2 EA
⑩
Override key
3 EA
⑪
Battery
1.5V 'AA' Size LR6 Alkaline, 4ea(DC 6V)
⑫
Screws
1 set
⑬
User manual
Main User manual
⑭
Installation template
Using for making hole at the door
⑮
Communication pack
Communication pack
Optional
⑯
Remote key
Remote key
Optional
※ Installation condition Door thickness 40~80mm
⑭
Screws
User
manual
⑬
⑤
⑩
⑫
⑪
Installation
template
Factory setting
Item
Setting Status
Ref.page
Auto/Manual lock mode
[Auto-lock]
8
Beep sound level (1~8 level)
8 level
7
Factory setting PIN code
123456
-
Remote key
(RP-20)
Optional parts
⑯
ISO
CARD
Tag
key
⑧
⑨
⑦
⑥
English
3"sec
3
MC
or
#
1
Chinese
2
How to select the language
⑮
Communication pack
(RXP-10)
