Allegion Schlage D Series Manual Download

Page: 71 / 573

Lockout cylinder

Schlage • Primus service manual • 11

Lockout cylinder

The Primus/Primus XP lockout cylinder is for use in

applications in which it is necessary to temporarily disable

the cylinder. It is essentially a very basic access control

device.

The lockout cylinder utilizes a standard 6-pin chamber row as

well as a 4-pin chamber row with a special key.

Normal row

of 6 chambers

Lockout row

has only front

4 chambers

When the plug is in its standard operating position all keys

will operate the lock. To temporarily disable to regular

operating keys, the plug can be turned with the special key to

align the bottom pins with the lockout row of pins.

NORMAL

OPERATION

LOCKOUT

MODE

Pinning rules

1. The fifth cut must be at least a #3 depth and the sixth cut

must be equal to or deeper than the fifth cut.

2. Lockout cylinders must NOT be master keyed. When keys

are inserted quickly, master pins may remain in the shell.

This could cause a lockout, trap an operating key, or just

prevent further operation of the cylinder.

How the lockout cylinder works

Operating key turned to the Lockout Position

OPERA

TING

KEY

The operating key cannot be removed in the lockout position

because the back two pins are unable to

disengage from the key

Lockout key turned to the lockout position

LOCK

OUT

KEY

The last two notches in the key are removed allowing the key

to exit the cylinder.

Operating key entering in lockout position

OPERA

TING

KEY

The operating key cannot enter the cylinder because the back

two pins are not able to settle into their bitting spaces on the

key.

NOTE: Lockout cylinders are not available in the new modular cylinder

design.

Summary of Contents for Schlage D Series






























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Schlage D Series

Reviews:

Related manuals for Schlage D Series

Brands by name

Popular brands

Allegion Schlage D Series, Manual

Search results

Summary of Contents for Schlage D Series

Reviews:

Related manuals for Schlage D Series

Brands by name

Popular brands