Allegion Schlage D Series Manual Download

Page: 83 / 573

Key control procedures: end user controlled systems

Schlage • Primus service manual • 23

Key control procedures: end user controlled systems

Signature verification

Authorization for the end user levels is performed at the

Schlage Key Control Center. The dealer is responsible for

submitting the end user’s signed forms to Schlage with each

order.

Primus signature card

The Primus Signature Card is found at the back of this

manual and should be used to register each project and its

authorized signatories with the factory.

The dealer should complete the form with the end user (job)

name, street address and zip code. The zip code is used to

maintain the varying degrees of geographical exclusivity

offered at the end user levels.

There is space for up to five authorized signatures on the

signature card. All signatures will have equal authority to

order locks, keys, key blanks and cylinders unless otherwise

noted. The signature at the top of the list has authority to add

and delete signatures from the card, so it is important that

the appropriate person is the top signer.

Primus face sheet form

The Primus Face Sheet form is located in the back of this

manual and is required for every Primus or Primus XP factory

order.

Levels 3, 4 and 9 are the highest levels of key control. For

this reason, no faxed or photocopied signatures will be

accepted by the Primus Key Control Center.

It is permissible to fax or photocopy the blank forms in order

to speed up the authorization process when the end user has

no blank forms. However, once the page is signed it becomes

an original and cannot be faxed or photocopied, then

submitted for an order.

It is also possible to order a supply of blank forms at no

charge using the following form numbers:

Signature Card

MS-E130

Face Sheet

MS-E120

Summary of Contents for Schlage D Series






























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Schlage D Series

Reviews:

Related manuals for Schlage D Series

Brands by name

Popular brands

Allegion Schlage D Series, Manual

Search results

Summary of Contents for Schlage D Series

Reviews:

Related manuals for Schlage D Series

Brands by name

Popular brands