104 • Schlage • ENGAGE Managed Property User's Guide
Device Defaults
Web Application
CTE
Fig. 8.104: CTE Default Settings
Table 8.11 CTE Device Property Wide Settings
Setting
Description
Beeper Enabled
• ON: the lock beeper will sound to provide device status.
• OFF: the lock beeper will remain silent.
Relock Delay
(seconds)
When a valid credential is presented, the locking device unlocks and then relocks.
Delayed relocks are from 1 – 30 seconds.
ADA Relock Delay
(seconds)
Enables ADA operation to allow additional time to access doors. Delayed relocks are
from 1 – 30 seconds.
Propped Door
Delay Enabled
• ON (enabled): the Propped Door Delay selection is required.
• OFF: the following option is not available
Note:
Î
The setting applies ONLY to devices that support Door Position Sensor
(DPS) for Propped Door Audits.
Propped Door
Delay (seconds)
ON: reports and records a Propped Door Audit after a specified time. Delayed relocks
are from 1 – 255 seconds.
Mobile Credential • ON: lock will accept Mobile Credential access and the following options are
available.
• OFF: Mobile Credential use is disabled
Communication
Range
Enables the Schlage Mobile Credential application to find locks from short or longer
distances.
Note:
Î
This is a PACS only feature. This setting has no effect on ENGAGE
accounts
Anti-Tailgate
• OFF: no special action is taken, the device relocks on the normal relock schedule.
• ON: the CTE will use the DPS sensor to immediately relock when the door closes
and terminate the relocking period upon closure.
DPS Enabled
• OFF: use when no DPS is installed.
• ON: the CTE will know that a DPS is installed and can enable the Door Propped and
Anti-tailgate features.
