IP6 Getting Started Guide
6
AP10352 Issue 4
Packed items
Check you have received the following:
•
IP6 Remote Controller
•
Getting Started Guide AP10352
•
Safety Sheet
•
12V Power Supply
1.
Introduction
The IP6 is part of the Allen & Heath IP Series of remote controllers. It interfaces with the
AHM, dLive or Avantis mixing system via standard TCP/IP Network connections and can
therefore be networked with other controllers, computers and third party devices using
standard Ethernet infrastructure. It can be powered by an external 12V PSU or over
Ethernet (PoE).
The IP6 controls and functions are programmed using the AHM System Manager
software, dLive Surface / Director software, or Avantis mixer / Director software, and can
suit a number of applications including:
-
Personal Monitoring
–
The IP6 can be configured to control the Send levels,
Pans and assignments of multiple channels to a specific mix on the
dLive/Avantis, for example for wireless IEM use, giving musicians the freedom
to control their own monitor sound.
-
Installation
–
The installer or system integrator can configure the IP6 to
provide the degree of control needed by the day to day operator, for example
the levels of microphones and music sources in a room.
