ALLEN & HEATH SQ MADI Option Card Fittings Manual Download

Page: 2 / 2

Card setup and patching signals

Synchronising the SQ to a MADI clock source is a two-step process:

Select the clock source for the mixer in the

Setup / Audio / Audio

Sync

screen. Typically, this is set to internal, but select I/O Port to

sync to the fitted option card.

Select the clock source for the MADI card in the

Setup / Audio / I/O

Port

screen. Either the wordclock input or a link input can be chosen.

Use the

Setup / Audio / I/O Port

screen to set the sample rate, sync source and

redundancy mode for the MADI card.

Use the SQ

I/O

screen to patch signals to or from the I/O Port.



For more information on SQ setup and functions please

refer to the latest SQ Firmware Reference Guide available

for download from

A limited one year manufacturer’s warranty applies to this product, the conditions

of which can be found at:

This product complies with the European Electromagnetic
Compatibility directive 2014/30/EU and the European Low Voltage
directive 2014/35/EU.

ALLEN

HEATH

Allen & Heath Limited, Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK

Summary of Contents for SQ MADI Option Card

Page 1: ...he 2 screws securing the I O Port blank panel to the SQ mixer 3 Slide the card into the slot and press it firmly into the mating connector 4 Refit the 2 screws to secure the card Front panel Word cloc...

Page 2: ...dundancy mode for the MADI card Use the SQ I O screen to patch signals to or from the I O Port For more information on SQ setup and functions please refer to the latest SQ Firmware Reference Guide ava...