6
O
PERATION
F
RONT
D
ISPLAY
P
ANEL
Indicator
Description
Online
The UPS is drawing utility power and performing double conversion to supply
power to connected equipment (see
Troubleshooting
).
On Battery
The UPS is supplying battery power to the connected equipment.
Bypass
The UPS is in bypass mode, sending utility power directly to connected equipment.
Bypass mode operation is the result of an internal UPS fault, an overload condition
or a user initiated command either through an accessory or the manual bypass
switch. Battery operation is not available while the UPS is in bypass mode (see
Troubleshooting
).
Fault
The UPS detects an internal fault (see
Troubleshooting
).
Overload
The connected loads are drawing more power than the UPS power rating (see
Troubleshooting
).
Replace
Battery
The battery is disconnected or must be replaced (see
Troubleshooting
)
.
Feature
Function
Power On
Press this button to turn on the UPS. (Read on for additional capabil ities.)
Power Off
Press this button to turn off the UPS.
Feature
Function
Normal /Bypass
Manually switch connected equipment to b ypass mode, so that utility power is
sent directly to connected equipment. Battery operation is not available while
the UPS is in bypass mode. (See
Troubleshooting.
)
