22
Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020
Chapter 3 Operate the Wall Mount Box PC
The following tables detail what LEDs and buttons are on the bottom of the
rear panel of each wall mount box PC.
Prepare for Installation
Restart or Reset the Wall
Mount Box PC
Restart the VersaView 6300B Wall Mount Box PC
Use either of the following methods to restart the box PC.
•
From the Start menu, click or choose Restart.
•
Press Ctrl+Alt+Delete, and then click or choose Restart.
During a restart, the box PC does the following:
•
Clears the RAM.
•
Starts the POST.
•
Initializes peripheral devices.
•
Loads the Windows OS.
Table 2 - LEDs and Buttons
No.
Description
Color
Function
1
Power supply LED
No color
The computer is not powered.
Green
The computer is on and powered by the main power supply.
Flashing green
The computer is on and powered by a UPS.
Yellow
If a UPS is connected, verify that the UPS connection is secure or that the UPS
battery is not faulty.
2
Over temperature/
battery fault LED
Red
The computer has exceeded its operating temperature. For more information,
see
.
Flashing red
The real-time clock (RTC) battery is lower than 2.5V. Replace before the battery
goes lower and risks loss of date and time.
3
Watchdog LED
Red
The watchdog timer has expired.
4
Mass storage LED
Yellow
When lit, access to a mass storage device (SSD or CFast) is happening through a
SATA channel.
5
On/off/standby/UPS LED
No color
The computer is powered off or the CPU is not starting.
Green
• The computer is powered on.
• The system is in a low-power state, and current session information is being
stored in the RAM.
Yellow
The computer is safe to power off; the operating system has been shut down
successfully.
Flashing green
The computer is powered but a UPS is powering the system while main power is
missing.
6
System reset button
—
Forces an internal reset, as if power was lost temporarily and then returned.
IMPORTANT:
Use this button only if there are no better options, like keyboard or
mouse commands, or if the resumed DC power does not restart the computer.
System reset can cause data loss and possible corruption to the operating
system.
7
Watchdog reset button
Turns off the watchdog LED (item 3).
1
2
3
4
6
7
5
Table 3 - LAN LEDs
No.
Description
Color
Function
1
Data link
No color
No data link is present.
Green
Data link is established.
Flashing green
Data link is established and there is data transfer.
2
Data speed
No color
10 Mbps
Green
100 Mbps
Yellow
1000 Mbps (1 Gbps)
1
2
IMPORTANT
A connected keyboard, mouse, and display are needed for some of the
following steps.
