126
Rockwell Automation Publication 825-UM004D-EN-P - November 2012
Chapter 9
825-PDN DeviceNet Communication Card
Table 60 - Hardware Bit Assignments and Description for the 825-P Modular Protection System
1.
While in RSNetWorx for DeviceNet, double-click
825-P Modular
Protection System
.
2.
Select tab
DeviceLogix
.
3.
If you are on-line with a device, in the dialog box that appears asking you to
upload or download, select
Upload
.
4.
Select
Start Logic Editor
.
5.
Do one of the following:
•
If programming off-line, continue to next step.
•
Do the following:
a. If not programming off-line, select
Edit
.
b. When asked if you want to enter edit mode, select
Yes
. In edit
mode, the entire list of function blocks is displayed in the toolbar.
6.
Left-click the
AND
function block.
7.
Move your cursor into the grid.
8.
Left-click to drop the function onto the grid.
9.
From the toolbar, select
Discrete Input Point
.
10.
From the pull-down menu, select
Input 2
. This is the remote Reset button
that is based on the I/O table example.
11.
Drag the input to the left of the
AND
function.
12.
To drop the input on the page, left-click on the position that you want.
13.
Position your cursor over the tip of
Input 2.
The pin tip turns green.
14.
Click on the pin tip when it turns green.
15.
Move your cursor toward the input of the
AND
function. A line follows
the cursor. When a connection can be made, the tip of the
AND
function
also turns green.
16.
Click on
Input
. The line is drawn from
Input 2
to the
Input 1
of the
AND
function.
17.
From the toolbar, select
Module Status Point
.
Input Table
Output Table
Bit
Description
Bit
Description
Input 2
Reset Button
Flt Reset
Reset Overload
Output 5
Tower Light
NOTE:
If this was not a valid connection, one of the pin tips would have turned
red
rather than
green. Double-clicking on the unused portion of the grid or pressing
Esc
at any time cancels
the connection process.
Summary of Contents for 825-P
