128
Rockwell Automation Publication 825-UM004D-EN-P - November 2012
Chapter 9
825-PDN DeviceNet Communication Card
28.
Select
OK
.
29.
Moving cursor into the grid, place
Aux Out 5
to the right of the
AND
function block
30.
Correct the
Fault Input
to the
Aux Out 5
.
31.
Do one of the following:
•
In the toolbar, select
Tools
.
•
From the pull-down menu, select
Logic Verify
.
32.
To toggle out of edit mode if you are online with a device, select
Tools.
33.
After selecting
Edit
from the main menu, select
Download
from the pull-
down menu (right corner of the toolbar).
34.
When the download is successful, select
OK
.
35.
From the same pull-down menu, select
Logic Enable On
.
36.
The 825-P Modular Protection System is now programmed and the logic
is active.
NOTE:
The PLC key switch must be in the Program position. If not, the download does not occur and
a generated error occurs.
Summary of Contents for 825-P
