10
ControlLogix AC (10-265V) DC (5-150V) Isolated Relay Module
Publication
1756-IN513D-EN-P - November 2003
Wire the Removable Terminal Block
Wire the RTB with a 1/8 inch (3.2mm) maximum flat-bladed
screwdriver before installing it onto the module.
Be sure that power is removed or the area is nonhazardous before
proceeding.
WARNING
When you connect or disconnect the Removable
Terminal Block (RTB) while field side power is on, an
electrical arc can occur. This could cause an explosion in
hazardous location installations.
Spring Clamp RTB
Cage Clamp RTB
20860-M
20859-M
1.
Strip 7/16 inch (11mm) maximum
length of wire.
2.
Insert the screwdriver into the
inner hole of the RTB.
3.
Insert the wire into the
open terminal and
remove the screwdriver.
1.
Strip 3/8 inch (9.5mm) maximum
length of wire.
2.
Insert the wire into the open terminal.
3.
Turn the screw clockwise to close the
terminal on the wire.